Entry range CNC press brakes "made for Europe"
- streamlined design with high precision, high rigidity
- electro-hydraulic servo system, full loop control synchorinization of ram
- throat deformation compensation mechanism, ensure the bending depth and precision
| Parameter | Unit |
| Nominal Presure | KN |
| Length of work table | mm |
| Distance between uprights | mm |
| Throat depth | mm |
| Ram stroke | mm |
| Ram speed | mm/s |
| Power of motor | kW |
| Tank volume | L |
| Thickness of worktable | mm |
| Max day light | mm |
| Overall dimension(LxWxH) | mm |
| Weight | kg |
PBA-400/4100 PBA-400/5100 PBA-400/6200 4000 4100 3200 510 315 110 | 9 | 100 30 1000 520 4400x2150x3600 31500 4000 5100 4200 510 315 110 | 9 | 100 30 1050 520 5400x2160x4000 37800 4000 6200 5100 510 315 110 | 9 | 100 30 1200 520 6500x2160x4000 46000
High precision mechanical crowning system
Shortened compensation time with high bending accuracy
Two HEIDENHAIN linear scales are installed on press brake which constantly monitors the ram position with micron level accuracy. These scales are mounted on a special bracket which are completely isolated from any deformation caused to the C-frame structure during the ram upstroke/downstroke and the load. In effect, it always gives the precise and actual position of the ram under any condition.
Many other makers of press brakes install the scales directly on the C-frame which results in errors in the real position of the ram.
Cybelec DNC600S (standard)
- 9.4″ large and high-contrast LCD display
- 2D graphics programming
- One page type correction - can be made in program page
- Function of "instant recovery" parameters
Cybelec DNC60 (optional)
- 5.5″ blue screen high-contrast LCD display
- "Easy bend" easy bending production mode
- External dimension calculation mode, accurately calculate backgauge position
- Realize 2D graphics programming on personal PC
Delem DA52 (optional)
- 6.4″ TFT colour LCD display
- One page type data programming
- Equip crowning control for worktable
- USB interface
Standard Accessories
HOERBIGER, Germany hydraulic system (a full loop electric-hydraulic proportional servo controlled)
SUMITOMO, Japan oil pump
WN brand main motor
Standard backgauge has one CNC axis (X) and completely up and down by hand wheel with reducer
Equipped with manual R axis.
2-V+T slot quick change die installation on worktable (including one set of European standard tooling)
80-160T equipped with standard wedge clampings
220-300T equipped with heavy model wedge clampings
Two fixed front sheet support (can be adjusted left and right by the screws with standard distance)
Two sides door-type safety guard and rear safety guard with rear door
Ram position measuring unit is ELGO magnetic scale
Often-use internal hexagonal key spanner for adjusting tools
Optional Accessories
Various punch and die clamping system [auto-hydraulic, HAWE (Germany) or WILA type]
Various punches and dies according to requirement
Extra finger-stops
Front sheet support
Mechanical crowning compensation device (manual/cnc controlled)
Hydraulic cooling device system
- water-cooling device
- fan-cooling device
- HYDAC, Germany fan-cooling device (Inc. automatic self-cycling)
- Constant temperature oil-cooling device
Air-conditioner for electric cabinet (700W)
Normal safety guard system
FIESSLER AKAS-LCIIF (inside PLC)
LAZERSAFE LZS003, Australia laser guarding
CE standard safety guards
Hydraulic system with middle-position monitoring function + Fiessler AKAS-IIF (inside PLC)
Hydraulic system with middle-position monitoring function + Fiessler AKAS-LCIIF (inside PLC, laser beam aligning ) + other CE requirement
Hydraulic system with middle-position monitoring function + Pilz safety PLC + Leuze light curtain
